Cisco Cisco D9824 Advanced Multi Decryption Receiver 설치 가이드
Configuring System Settings
78-4039426-01 Rev D
191
Adding a Trap Destination
1 Click Add in the Trap Destination Configuration section.
1 Click Add in the Trap Destination Configuration section.
2 Type the Trap Destination IP Address that sets the destination for SNMP trap
messages for system events (i.e. fault messages). You can enter up to 12
characters (e.g., 155.128.100.200).
characters (e.g., 155.128.100.200).
3 Type the Community String for the trap destination (IP Address entered above).
4 Enter public or custom string. The default is public. You can enter a string up to
4 Enter public or custom string. The default is public. You can enter a string up to
35 characters.
5 To edit/delete an existing trap destination, select the trap destination entry by
clicking on the radio button. Make the necessary changes, or click Delete to
remove the address from the Trap Destination Configuration list.
remove the address from the Trap Destination Configuration list.
6 Click Apply.