Cisco Cisco Aironet 1200 Access Point 설치 가이드
21
Quick Start Guide Cisco Aironet 1200 Series Access Points
Connecting to an Ethernet Network with an Inline
Power Source
Power Source
Follow these steps to connect the access point to the Ethernet LAN when you
have an inline power source:
have an inline power source:
1.
Connect the Ethernet cable to the RJ-45 Ethernet connector labeled
Ethernet on the access point. Connect the other end of the cable to one
of the following:
Ethernet on the access point. Connect the other end of the cable to one
of the following:
Caution
Both the Ethernet and console ports use RJ-45 connectors. Be
careful when connecting the Ethernet cable to avoid connecting
to the console port.
careful when connecting the Ethernet cable to avoid connecting
to the console port.
a. A switch with inline power, such as a Cisco Catalyst 3550-24 PWR.
b. An inline power switch panel, such as a Cisco Catalyst Inline Power
Patch Panel.
c. The end of a Cisco Aironet power injector labeled To AP/Bridge and
the other end labeled To Network to the 10/100 Ethernet LAN.