Cisco Cisco Aironet 1200 Access Point 설치 가이드
23
Quick Start Guide Cisco Aironet 1200 Series Access Points
Infrastructure) slowly blink amber, red, and green in sequence; the sequence
takes a couple of minutes to complete. Because the radios are disabled, the
Radio LED is dark.
takes a couple of minutes to complete. Because the radios are disabled, the
Radio LED is dark.
Note
See the Cisco Aironet 1200 Series Access Point Hardware
Installation Guide for a detailed description of the LED displays.
Installation Guide for a detailed description of the LED displays.
When the sequence is complete, you are ready to associate an IP address with
the access point and perform an initial configuration.
the access point and perform an initial configuration.
Obtaining and Assigning an IP Address
To browse to the access point’s Express Setup page, you must either obtain or
assign the access point’s IP address using one of the following methods:
assign the access point’s IP address using one of the following methods:
•
Connect to the access point console port and assign a static IP address.
•
Use a DHCP server (if available) to automatically assign an IP address.
You can find out the DHCP-assigned IP address using one of the
following methods:
You can find out the DHCP-assigned IP address using one of the
following methods:
– Connect to the access point console port and use the show ip
interface brief command to display the IP address.
– Query the DHCP server using the access point’s MAC address to
identify the IP address. Your network administrator can do this.