Cisco Cisco Agent Desktop 8.5 기술 참조
Cisco CAD Service Information 7.0(2)
28
31-Mar-06
Voice-Over IP Monitor Client
HKEY_LOCAL_MACHINE\SOFTWARE\Spanlink\CAD\VoIP Monitor Client\
Table 12.
Voice-Over IP Monitor Client registry entries
Key
Value
Type
Description
Config
From Agent Port
dword
IP port for RTP stream being sent
from IP agent. Default value =
59012. Port must be an even
number. The next port is reserved
for RTCP stream.
from IP agent. Default value =
59012. Port must be an even
number. The next port is reserved
for RTCP stream.
Jitter Buffer
dword
The amount of voice data to
buffer before playing. Default
value = 400 ms. On a typical
internal network this value can be
set as low as 50 ms. The default
is set higher so the sound quality
is good even on a congested
network.
buffer before playing. Default
value = 400 ms. On a typical
internal network this value can be
set as low as 50 ms. The default
is set higher so the sound quality
is good even on a congested
network.
Server Host
string
Host name of the VoIP service.
Sound Buffers
dword
Number of sound card buffers.
Default = 30; minimum is 3. If the
monitor sound quality is choppy,
stuttering, or like a motorboat you
may be able to make it sound
better by adjusting this value
higher. Setting the value higher
increases the sound lag, and may
cause a slight stutter at the
beginning of a monitor session.
Default = 30; minimum is 3. If the
monitor sound quality is choppy,
stuttering, or like a motorboat you
may be able to make it sound
better by adjusting this value
higher. Setting the value higher
increases the sound lag, and may
cause a slight stutter at the
beginning of a monitor session.
Config
To Agent Port
dword
IP port for RTP stream being sent
to Agent IP Phone. Default value
= 59010. The port must be an
even number. The next port is
reserved for RTCP stream.
to Agent IP Phone. Default value
= 59010. The port must be an
even number. The next port is
reserved for RTCP stream.