Cisco Cisco TelePresence Video Communication Server Expressway
Document Revision History
The following table summarizes the changes that have been applied to this document.
Date
Description
November 2015
New template applied. Version numbers updated. Republished for X8.7.
July 2015
Updated for X8.6.
April 2015
Updated for X8.5.2. Link to new IP address dialing article.
December 2014
Updated for X8.5. IP address dialing information modified.
June 2014
Republished for X8.2.
December 2013
Updated for X8.1. Included support for new Cisco Unified Communications Manager (8.6.1
or later) zone profile and hence removed the Unified CM zone profile parameters and
Enabling BFCP appendices as Custom profiles are no longer required.
Enabling BFCP appendices as Custom profiles are no longer required.
March 2013
Simplified the example dial plan. Moved the requirement to configure the Unified CM
Cluster Fully Qualified Domain Name to be part of the main configuration, and not just
required for clusters. Moved TLS connectivity instructions into the document body and
added troubleshooting note about Unified CM DNS SRV lookups.
Cluster Fully Qualified Domain Name to be part of the main configuration, and not just
required for clusters. Moved TLS connectivity instructions into the document body and
added troubleshooting note about Unified CM DNS SRV lookups.
September 2012
Revised Appendix 7 and Appendix 8 for use of encrypted SRTCP. Document now only
refers to Unified CM 8.x and 9.x.
refers to Unified CM 8.x and 9.x.
August 2012
Updated for VCS X7.2.
March 2012
Updated for VCS X7.1.
October 2011
Updated guidance on configuration for Multiway (Call Signaling Routed Mode).
August 2011
Updated for VCS X7.0 and BFCP. Updated guidance on connecting VCS to a cluster of
Unified CM nodes.
Unified CM nodes.
June 2011
Updated for VCS X6.
March 2011
Updates to Appendix 5 for Unified CM version 8.5 regarding connecting Unified CM to a
cluster of VCS peers. Added Appendix 12 – Characters allowed in SIP URIs.
cluster of VCS peers. Added Appendix 12 – Characters allowed in SIP URIs.
October 2010
Additions for Clustered Unified CMs. Additions to handle returning call to Unified CM
callback URI. Updates to handle call transfer.
callback URI. Updates to handle call transfer.
July 2010
Document title updated to refer to Cisco Unified Communications Manager. Added this
document revision history table. General updates applied to reflect user interface
differences in Unified CM v8.
document revision history table. General updates applied to reflect user interface
differences in Unified CM v8.
June 2010
Added Appendix 10 - Connecting VCS to Unified CM using TLS.
April 2010
Updated for VCS X5.1. Added additional troubleshooting information.
January 2010
Initial release.
Cisco Legal Information
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO
CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE
BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE
BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
49
Cisco VCS SIP Trunk to Unified CM Deployment Guide