Cisco Cisco TelePresence Video Communication Server Expressway
Enabling calls between endpoints registered on CUCM
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X6 using a SIP trunk
Page 14 of 49
Add a phone device
1. Go to Device > Phone.
2. Click Add New.
3. Configure as required.
4. Click Save.
Alternatively, if there is already another phone configured, copy its configuration by selecting “super
copy”, entering the new phone’s MAC address and then changing the description (especially correct
the MAC address part of the description).
copy”, entering the new phone’s MAC address and then changing the description (especially correct
the MAC address part of the description).
Device directory number configuration
1. Go to Device > Phone.
2. Select the relevant device name.
3. On the left hand side, select a line.
4. Set up the required directory number (for this example use a 3xxx number).
Configure phone endpoint to pick up its configuration from CUCM
On the Cisco phone:
1. Press the settings button.
2. Select the Network Configuration section, and check whether the TFTP Server is the IP address
of CUCM. If not:
a. Press the settings button twice – to return to SETTINGS menu.
b. Select Unlock and enter the appropriate password.
c.
Select the Network Configuration section.
d. Set Alternate TFTP = YES.
e. Set TFTP Server = <IP address of CUCM>.
f.
Select Accept.
g. Select Save.
3. Reboot the phone (unplug and re-connect the power).
The phone should now indicate that Line 1 is the phone number specified on CUCM (for example
3001).
3001).
Calls can now be made between handsets registered on CUCM.