Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on Cisco VCS Control to call endpoints registered on CUCM
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X6 using a SIP trunk
Page 16 of 49
Enabling endpoints registered on Cisco VCS
Control to call endpoints registered on CUCM
Control to call endpoints registered on CUCM
CUCM configuration
Configuration of CUCM to enable calls to be made between devices that register to it can be broken
down into 2 steps:
down into 2 steps:
Configure the SIP Trunk security profile.
Configure the SIP Trunk device.
Configure the SIP Trunk security profile
1. On CUCM, go to System > Security > SIP Trunk Security profile.
2. Click Add New.
3. Configure the fields as follows:
Name
Non Secure SIP Trunk Profile
Device Security Mode
Non Secure
Incoming Transport Type
TCP+UDP
Outgoing Transport Type
TCP
Incoming Port
5060
4. Click Save.