Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on the video network to call Lync clients registered on Lync Server
Cisco VCS Deployment Guide: Microsoft Lync 2010 and Cisco VCS X6.1
Page 38 of 81
Note: Do not worry about the status section indicating
Failed
. This will change to
Active
once the
zone’s IP address / FQDN has been saved.
If there are more than 6 FEPs behind the main Hardware load balancer, add further neighbor zones
(each with unique names) until all FEPs are referenced as a Peer x Address.
(each with unique names) until all FEPs are referenced as a Peer x Address.
Note: Do not configure any search rules to point to these zones - these zones are receive only.
Calls can now be made between SIP and H.323 endpoints registered on the Video Network to Lync
clients registered on Lync Server.
clients registered on Lync Server.
Testing the configuration
Test calls from endpoints registered on the video network to Lync clients registered on Lync Server.
For example, call user1@test-customer.com or user2@test-customer.com from both SIP and H.323
endpoints registered on Cisco VCS Control.
endpoints registered on Cisco VCS Control.