Cisco Cisco TelePresence Video Communication Server Expressway
Configure the Lync B2BUA to Offer TURN Services to External Lync Clients
Prerequisites
■
The Gateway VCS has the Microsoft Interoperability option key
■
There is a TURN server in the DMZ. This topic presumes that you will use the VCS Expressway as a
TURN server.
TURN server.
Configure TURN Services on the Gateway VCS
To enable call connectivity with Lync clients calling via an Edge server, the B2BUA needs to have TURN services
properly configured to point to a VCS Expressway with TURN enabled.
properly configured to point to a VCS Expressway with TURN enabled.
1.
Go to Applications > B2BUA > B2BUA TURN servers
2.
Click New
3.
Configure the fields as follows:
TURN server address
IP address of a VCS Expressway which has TURN enabled.
(Just a single VCS; it may be just one peer from a cluster.)
(Just a single VCS; it may be just one peer from a cluster.)
TURN server port
3478
The default TURN listening port on the VCS Expressway.
On Large systems you can configure a range of TURN request listening
ports. The default range is 3478 – 3483.
ports. The default range is 3478 – 3483.
Description
An optional description of this TURN server.
TURN services username and
TURN services password
The username and password that the Gateway VCS uses to authenticate
against the TURN server. For example,
against the TURN server. For example,
GatewayB2BUA
4.
Click Add address
5.
Repeat the above steps if additional TURN servers are required
6.
Go to Applications > B2BUA > Microsoft Lync > Configuration
7.
Set Offer Turn services to Yes
8.
Click Save
34
Cisco VCS and Microsoft Lync Deployment Guide
Configuration