Cisco Cisco TelePresence Video Communication Server Expressway
To configure presence in this deployment:
1.
On the VCS Control, go to Applications > Presence.
2.
Configure the following fields:
SIP SIMPLE Presence User Agent
On (if VCS Control is to generate presence information for
registered endpoints)
registered endpoints)
Default published status for registered
endpoints
endpoints
Online
SIP SIMPLE Presence Server
On
3.
Click Save.
4.
On the Gateway VCS, go to Applications > Presence and configure the following:
SIP SIMPLE Presence User Agent
Off
SIP SIMPLE Presence Server
Off
5.
Click Save.
Test Presence
Set up the endpoints registered on VCS as buddies in Lync clients, and then:
■
Check the status of the Lync users on the Gateway VCS by looking at the Lync user status page (Status >
Applications > Lync users). Check that:
Applications > Lync users). Check that:
—
Registration state = Registered
—
Subscription state = Subscribed
—
Presence state = offline or online
■
Check the icon on Lync client changes from gray to green when an endpoint is registered on VCS
■
Check the icon on Lync client changes from green to gray if the endpoint is de-registered from VCS
37
Cisco VCS and Microsoft Lync Deployment Guide
Configuration