Cisco Cisco TelePresence Video Communication Server Expressway
1.
Enable the user for Lync:
To enable AD users for Lync using the Lync Server Control Panel:
a.
Open the Lync Server Control Panel and find the Users section.
b.
Find the control to enable users, which allows you to search for and add existing AD users.
c.
Assign the selected users to the appropriate Lync Server pool.
d.
Select which AD user properties are used to generate the users' SIP URIs.
To enable AD users for Lync, using PowerShell:
Use the command
enable-csuser
. For example:
enable-csuser -identity "example\alice.parkes" -registrarpool "fepool.example.com" -sipaddress
sip:alice.parkes@example.com
sip:alice.parkes@example.com
2.
Repeat for all AD users that are named after FindMe accounts
Configure the VCS Control to Use the Gateway VCS for Presence
Disable the Presence Server on the VCS Control
1.
Go to Applications > Presence.
2.
Configure the following fields:
SIP SIMPLE Presence User Agent
On (if VCS Control is to generate presence information for
registered endpoints)
registered endpoints)
Default published status for registered
endpoints
endpoints
Online
SIP SIMPLE Presence Server
Off (the Gateway VCS will be the Presence Server)
Create a Search Rule to Route Messages to the Presence Server on the Gateway VCS
The PUA on the VCS Control needs to be able to route PUBLISH messages from its domain endpoints to the Presence
Server running on the Gateway VCS. To do this, a search rule is required:
Server running on the Gateway VCS. To do this, a search rule is required:
1.
Go to Configuration > Dial plan > Search rules.
2.
Click New.
65
Cisco VCS and Microsoft Lync Deployment Guide