Cisco Cisco TelePresence Video Communication Server Expressway
3.
Configure the following fields:
Rule name
An appropriate name, for example "Route PUBLISH messages to Gateway"
Priority
Leave as default, for example 100. Note that this should be a lower priority (a
larger number) than the priority configured for the LocalZoneMatch.
larger number) than the priority configured for the LocalZoneMatch.
Source
Any
Mode
Alias pattern match
Pattern type
Regex
Pattern string
Configure the pattern to match the domain supported in the video network, for
example:
example:
.*@video\.example\.com
Pattern behavior
Leave
On successful match
Continue
Target
Select the Gateway zone, for example "To Gateway"
4.
Click Create search rule.
Note that this search rule does not conflict with Local Zone searches (which may contain the same pattern
match string) because the PUA is not treated as a Local Zone registered device.
match string) because the PUA is not treated as a Local Zone registered device.
5.
Create additional search rules for any other SIP domains supported by this VCS (i.e. for endpoints that are
registered to the VCS Control) otherwise Presence will not work (messages will not get forwarded).
registered to the VCS Control) otherwise Presence will not work (messages will not get forwarded).
Configure the Presence Server on the Gateway VCS
Enable the Presence Server
On the Gateway VCS:
1.
Go to Applications > Presence.
2.
Configure the following fields:
SIP SIMPLE Presence User Agent
Off
Default published status for registered endpoints
Online
SIP SIMPLE Presence Server
On
66
Cisco VCS and Microsoft Lync Deployment Guide