Cisco Cisco TelePresence Video Communication Server Expressway
"To Microsoft Lync Server via B2BUA" neighbor zone
When the B2BUA is enabled, a non-configurable neighbor zone called To Microsoft Lync Server via
B2BUA is automatically set up:
B2BUA is automatically set up:
Set up a search rule to route calls to the Lync domain to Lync
Search rules are used to specify the URIs to be forwarded to Lync (for example, by matching the domain of
the destination or by matching some element in the URI).
the destination or by matching some element in the URI).
Search rules can also be used to transform URIs before they are sent to a neighbor, for example to add or
modify the domain or add, remove or translate user-id prefixes and even to add extra tags to SIP URIs, such
as user=phone (see
modify the domain or add, remove or translate user-id prefixes and even to add extra tags to SIP URIs, such
as user=phone (see
for further information about user=phone).
For this scenario, anything with a domain ciscotp.com will be matched (and passed to Lync via the B2BUA);
no transformation is required.
no transformation is required.
1. Go to
Configuration > Dial plan > Search rules
.
2. Click New.
3. Configure the search rule so that all calls to URIs in the format .+@ciscotp.com.* are forwarded to Lync.
(To handle presence messaging a .* is included at the end of the domain to allow any parameters
Cisco TelePresence Microsoft Lync and Cisco VCS Deployment Guide (X8.2)
Page 31 of 80
Enabling endpoints registered on the video network to call clients registered on Lync