Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco VCS
Configuring the Cisco VCS
Configure neighbor zone to Cisco AM GW
Create a neighbor zone called, for example, “To AM Gateway”.
1. Go to the Zones page (VCS configuration > Zones).
1. Go to the Zones page (VCS configuration > Zones).
2. Select
New. You are taken to the Create zone page.
3. Configure the fields as follows:
Name
For example “To AM Gateway”
Type
Select Neighbor
4. Configure the fields as follows:
H.323 Mode
Off
SIP Mode
On
SIP Port
5061
SIP Transport
TLS
TLS verify mode
Off
Authentication trust
mode
mode
Off
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Cisco VCS Control X5.1
and Cisco AM GW 1.0
and Cisco AM GW 1.0
Page 6 of 24