Cisco Cisco TelePresence Video Communication Server Expressway 설치 가이드
■
the first is used for the standard LAN 1 interface
■
the second is used if Dual Network interfaces is enabled (LAN 2)
■
the third is reserved for future use
Allocating a Virtual NIC to a Physical NIC Interface
Virtual NICs can be assigned to physical interfaces as follows:
1.
Ensure that the physical NIC on the VM host is connected and operational.
2.
Set up or check that there are Virtual Switches (vNetwork Distributed Switches) for each physical NIC. (Select
the host on which the VM VCS will run, select the Configuration tab and select Networking.)
the host on which the VM VCS will run, select the Configuration tab and select Networking.)
3.
Ensure that there is at least one Virtual Machine Port Group (with associated VLAN IDs) set up for each
physical NIC.
physical NIC.
To add a new Virtual Machine Port Group:
a.
Click Properties on the appropriate Virtual Switch or vNetwork Distributed Switch.
b.
Follow the network wizard.
4.
Note the name of a Virtual Machine Port Group connecting to the required NIC.
5.
Select the VM guest; right click it and select Edit settings…
18
Cisco TelePresence VCS on Virtual Machine Installation Guide
Hardware References