Cisco Cisco TelePresence Video Communication Server Expressway 설치 가이드
6.
Select the required network adaptor (Network adaptor 1 = LAN 1, Network adaptor 2 = LAN 2).
7.
Select the appropriate Network label (Virtual Machine Port Group) to associate the VCS LAN interface with
the required physical NIC.
the required physical NIC.
8.
After a few seconds the VCS will be able to communicate over the physical interface.
Additional Information
Upgrading a VM VCS
Read this before you begin
■
To avoid any performance degradation we recommend that you upgrade the VCS while the system is inactive.
■
If your Cisco VCS is registered for Hybrid Services: Your Management Connector must be up to date before
you upgrade your Cisco VCS. You must authorize and accept any upgrades advertised by the Cisco
Collaboration Cloud before attempting to upgrade.
you upgrade your Cisco VCS. You must authorize and accept any upgrades advertised by the Cisco
Collaboration Cloud before attempting to upgrade.
■
If the VCS is part of a cluster or is using provisioning or FindMe, follow the relevant Cisco VCS Cluster
Deployment Guide instead of this procedure.
Deployment Guide instead of this procedure.
Upgrade procedure
When upgrading a VM VCS you must use a .tar.gz file (available from the software download site), not an .ova file:
1.
Log in to the VCS VM web interface as an administrator.
2.
Backup the VCS from the Backup page (Maintenance > Backup and restore).
3.
Upgrade the VCS from the Upgrade page (Maintenance > Upgrade).
19
Cisco TelePresence VCS on Virtual Machine Installation Guide
Additional Information