Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Field
Description
Usage tips
TLS verify
mode and
subject
name
mode and
subject
name
Controls whether the VCS performs X.509 certificate
checking against the destination system server
returned by the DNS lookup.
checking against the destination system server
returned by the DNS lookup.
If TLS verify mode is enabled, a TLS verify subject
name must be specified. This is the certificate
holder's name to look for in the destination system
server's X.509 certificate.
name must be specified. This is the certificate
holder's name to look for in the destination system
server's X.509 certificate.
This setting only applies if the DNS lookup
specifies TLS as the required protocol. If TLS
is not required then the setting is ignored.
See
specifies TLS as the required protocol. If TLS
is not required then the setting is ignored.
See
TLS verify
subject
name
subject
name
The certificate holder's name to look for in the
destination system server's X.509 certificate (must be
in either the Subject Common Name or the Subject
Alternative Name attributes).
destination system server's X.509 certificate (must be
in either the Subject Common Name or the Subject
Alternative Name attributes).
Fallback
transport
protocol
transport
protocol
The transport type to use for SIP calls from the DNS
zone, when DNS NAPTR records and SIP URI
parameters do not provide the preferred transport
information.
zone, when DNS NAPTR records and SIP URI
parameters do not provide the preferred transport
information.
The default is UDP (if enabled).
Media
encryption
mode
encryption
mode
Controls the media encryption policy applied by the
VCS for SIP calls (including interworked calls) to the
internet.
VCS for SIP calls (including interworked calls) to the
internet.
ICE
support
support
Controls whether ICE messages are supported by
the devices in this zone.
the devices in this zone.
Zone
profile
profile
Determines how the zone's advanced settings are
configured.
configured.
Default: uses the factory default profile.
Custom: allows you to configure each setting
individually.
individually.
Only use the Custom profile to configure the
individual advanced settings on the advice
of Cisco customer support.
individual advanced settings on the advice
of Cisco customer support.
Zone configuration: advanced settings
The table below describes the advanced zone configuration options for the Custom zone profile. Some of
these settings only apply to specific zone types.
these settings only apply to specific zone types.
Setting
Description
Default
Zone
types
types
Monitor peer
status
status
Specifies whether the VCS monitors the status of the zone's peers. If
enabled, H.323 LRQs and/or SIP OPTIONS are periodically sent to the
peers. If a peer fails to respond, that peer is marked as inactive. If all peers
fail to respond the zone is marked as inactive.
enabled, H.323 LRQs and/or SIP OPTIONS are periodically sent to the
peers. If a peer fails to respond, that peer is marked as inactive. If all peers
fail to respond the zone is marked as inactive.
Yes
Neighbor
Call signaling
routed mode
routed mode
Specifies how the VCS handles the signaling for calls to and from this
neighbor.
neighbor.
Auto: signaling is taken as determined by the Call signaling optimization
(
(
Configuration > Call routing
) configuration.
Always: signaling is always taken for calls to or from this neighbor,
regardless of the Call signaling optimization configuration.
regardless of the Call signaling optimization configuration.
Calls via traversal zones or the B2BUA always take the signaling.
Auto
Neighbor
Cisco TelePresence Video Communication Server Administrator Guide (X8.2)
Page 175 of 542
Zones and neighbors
Configuring zones