Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼

다운로드
페이지 488
Overview and status information
Cisco VCS Administrator Guide (X7.0)
Page 41 of 488
of a cluster, the history of all registrations across the cluster is shown.
The following information is displayed:
Field
Description
Name
The H.323 alias or SIP AOR that the device registered.
Clicking on an individual Name takes you to the
page for that registration.
E164
For H.323 devices that registered one or more E.164 numbers, the first will be shown here. For SIP
devices this will always be blank because they cannot register E.164 numbers.
Type
Indicates the nature of the registration. This will most commonly be Endpoint, Gateway, or SIP UA.
Protocol Indicates whether the registration was for a SIP or H.323 device.
Creation
time
The date and time at which the registration was accepted.
If an NTP server has not been configured, this will say Time not set.
End
time
The date and time at which the registration was terminated.
Duration The length of time that the registration was in place.
Peer
Identifies the cluster peer to which the alias was registered.
Reason
The reason why the registration was terminated.
Filtering the list
To limit the list of registrations, enter one or more characters in the Filter field and click Filter. Only those
registrations that contain (in any of the displayed fields) the string you entered will be shown.
To return to the full list of registrations, click Reset.
Registration details
The
Registration details
page (
Status > Registrations > By device
,
Status > Registrations > By
alias
or
Status > Registrations > History
, then click on the registration name) shows the particulars of
a single registration.
The exact details shown here depend on the device's protocol, and whether the registration is still
current. For example, SIP registrations include the AOR, contact and, if applicable, public GRUU
details. H.323 registration details include all of the registered aliases.
Unregistering and blocking devices
n
Click Unregister to unregister the device. Note that the device may automatically re-register after a
period of time, depending on its configuration. To prevent this, you must also use a
such as an Allow List or Deny List.
n
Click Unregister and block to unregister the device and add the alias to the
page, thus
preventing the device from automatically re-registering. (This option is only available if the Restriction
policy 
has been set to Deny List.)