Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
284
D14049.08
November 2010
November 2010
Grey Headline (continued)
CISCO TELEPRESENCE
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Warnings
Warnings occur when an event or configuration change has taken place on the VCS that requires some manual administrator intervention, such as a restart. Warnings may also be raised for hardware
and environmental issues such as faulty disks and fans or high temperatures. The Warnings page (Status > Warnings) provides a list of all the warnings currently in place on your system (and, where
applicable, their proposed resolution).
and environmental issues such as faulty disks and fans or high temperatures. The Warnings page (Status > Warnings) provides a list of all the warnings currently in place on your system (and, where
applicable, their proposed resolution).
When there are unacknowledged warnings in place on the VCS, a warning icon
appears at the top right of all pages. The following table lists the warnings that can be raised on the VCS.
Overview
Warning message
Resolution
An Ethernet interface speed setting has been negotiated to a value other than 1000Mb/s full duplex or 100Mb/s full duplex. This may result in
packet loss over your network
packet loss over your network
Configure
Capacity warning: the number of concurrent non-traversal calls has approached the licensed limit
Contact your Cisco representative
Capacity warning: the number of concurrent traversal calls has approached the licensed limit
Contact your Cisco representative
Capacity warning: the number of concurrent Registrations has approached the licensed limit
Contact your Cisco representative
Cluster name not configured: if FindMe or clustering are in use a cluster name must be defined
Configure the
Cluster replication error: automatic replication of configuration has been temporarily disabled because an upgrade is in progress
Wait until the upgrade has completed
Cluster replication error: cannot find master or this peer's configuration file, manual synchronization of configuration is required
View
Cluster replication error: configuration master ID is inconsistent, manual synchronization of configuration is required
View
Cluster replication error: NTP server is not configured
Configure an
Cluster replication error: the local VCS does not appear in the list of peers
Check the
Cluster replication error: the Master peer is unreachable
Check the
Cluster replication error: the NTP server is unreachable
Reconfigure the
Cluster replication error: there was an error during automatic replication of configuration
View
Cluster replication error: this peer's configuration conflicts with the master's configuration, manual synchronization of configuration is required
View
Configuration conflict: a domain is in use by the OCS Relay application that has not been configured on the VCS
Reconfigure the
or view and edit the VCS
Configuration conflict: the FindMe mode is set to "On" or "Third Party Manager" but the FindMe option key has been deleted
Reconfigure
or reinstall the
Configuration warning: expected default link between the Default Subzone and the Cluster Subzone is missing
Configure
Configuration warning: expected default link between the Default Subzone and the Default Zone is missing
Configure
Configuration warning: expected default link between the Default Subzone and the Traversal Subzone is missing
Configure
Warnings list