Cisco Cisco Web Security Appliance S690 사용자 가이드

S N M P   T R A P S

C H A P T E R   1 8 :   M O N I T O R I N G

 411

What threshold would you like to set for CPU utilization?
[95]>

What URL would you like to check for connectivity failure?
[http://downloads.ironport.com]>

Enterprise Trap Status
1. CPUUtilizationExceeded       Enabled
2. RAIDStatusChange             Enabled
3. connectivityFailure          Enabled
4. fanFailure                   Enabled
5. highTemperature              Enabled
6. keyExpiration                Enabled
7. linkDown                     Enabled
8. linkUp                       Enabled
9. memoryUtilizationExceeded    Disabled
10. powerSupplyStatusChange     Enabled
11. resourceConservationMode    Enabled
12. updateFailure               Enabled
13. upstream_proxy_failure      Enabled
Do you want to change any of these settings? [N]>

Enter the System Location string.
[Unknown: Not Yet Configured]> Network Operations Center - west; rack 
#30, position 3

Enter the System Contact string.
[snmp@localhost]> Joe Administrator, x8888

Current SNMP settings:
Listening on interface “Management” 192.168.1.1 port 161.
SNMP v3: Enabled.
SNMP v1/v2: Enabled, accepting requests from subnet 192.168.1.1.
SNMP v1/v2 Community String: public
Trap target: 10.1.1.29
Location: Network Operations Center - west; rack #30, position 3
System Contact: Joe Administrator, x8888

Choose the operation you want to perform:
- SETUP - Configure SNMP.
[]>

example.com>