Cisco Cisco Customer Voice Portal Downloads
Example:
call app voice load CVPSelfService <Enter>
•
CVPSelfService
•
HelloWorld
•
customhelloworld
•
cvperror
•
ringtone
Complete the Exercise by Placing the Test Call
Place a call into the system using a configured dialed number and a phone connected to the
gateway's FXS port or configured through communications manager.
gateway's FXS port or configured through communications manager.
Place the POTS or VoIP Call
Complete the following steps to place the call and test the exercise:
Step 1
If you are using the "POTS" implementation of this exercise (that is, the phone is connected to
an FXS port on the gateway), dial the number configured in the gateway dial-peer: 8002221111.
an FXS port on the gateway), dial the number configured in the gateway dial-peer: 8002221111.
Or, if you are using a VoIP phone, through Unified Communications Manager, dial the number
you set up in for HelloWorld in
you set up in for HelloWorld in
: 8005551234.
Step 2
Listen to the HelloWorld response.
You should immediately hear brief music followed by the message: You have successfully
installed the Cisco VXML server.
installed the Cisco VXML server.
Step 3
If you do not hear the proper response to the call, refer to
Getting Started with Cisco Unified Customer Voice Portal Release 8.0(0)
60
Chapter 5: Unified CVP VXML Server Standalone Call Flow Model Exercise (HelloWorld)
Complete the Exercise by Placing the Test Call