Cisco Cisco Agent Desktop 9.0 설치 가이드
March 31, 2014
85
Configuring a Secondary Server in a Replicated
System
System
Complete the following procedure if you are running the CAD Configuration Setup
utility for the first time on the secondary server in a replicated system (Side B).
utility for the first time on the secondary server in a replicated system (Side B).
To enter configuration data on the secondary base services computer (Side B):
1. The CAD Configuration Setup utility starts automatically and displays the
Location of the CAD Base Services dialog (
).
2. Enter the IP address of the primary CAD base services and then click OK. A
dialog box appears asking you if you want to set up Directory Services
replication.
replication.
3. Click Yes. The Secondary CAD Base Services dialog box appears (
Figure 23.
Secondary CAD Base Services dialog box
4. Enter the IP address of the server that hosts the secondary CAD base
services, and then click OK. A confirmation dialog box appears prompting you
to indicate whether the primary and secondary IP addresses are correct.
to indicate whether the primary and secondary IP addresses are correct.
5. Click Yes to set up replication. When replication is done, the CAD
Configuration Setup utility launches.
6. The fields for each node are already populated based on the information
entered with the CAD Configuration Setup utility on the primary server
(Side A). Navigate through each node and verify the information is correct.
(Side A). Navigate through each node and verify the information is correct.
7. When you have reviewed all nodes, click Save on the toolbar or choose File >
Save. When the data is successfully saved, the program ends automatically.
NOTE: The save process might take several minutes.