Cisco Cisco TelePresence MX700 사용자 가이드
74
D1534502 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: March 2016 for CE8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: March 2016 for CE8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
If you enable Auto Answer the
system will respond by itself to
incoming calls after a delay specified
by you. Note that an activated auto
answer may not provide you with
the privacy desired. In the example
shown here Auto Answer is set to
system will respond by itself to
incoming calls after a delay specified
by you. Note that an activated auto
answer may not provide you with
the privacy desired. In the example
shown here Auto Answer is set to
Off.
On certain occasions you may have
to change the bandwidth (and
hence the quality) of the call. Some
configurations may have different
incoming and outgoing bandwidths
(typically ADSL connections), and
you may specify the default call rate
to ensure a stable video quality.
to change the bandwidth (and
hence the quality) of the call. Some
configurations may have different
incoming and outgoing bandwidths
(typically ADSL connections), and
you may specify the default call rate
to ensure a stable video quality.
The default protocol may also be
specified. In the example shown, the
protocol has been set to SIP.
protocol has been set to SIP.
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
function letting you exit the menu
undoing any changes you have
made. Take care!
Settings
Administrator Settings—Call Details
About Call Details
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!