Cisco Cisco TelePresence MX700 사용자 가이드
76
D1534502 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: March 2016 for CE8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: March 2016 for CE8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
There are basically two modes of
video conferencing; viz. MultiWay
and MultiSite.
and MultiSite.
•
To enable MultiWay, a MultiWay
address must have been entered.
•
If a MultiWay address has been
specified and MultiWay is selected,
MultiWay will always be used for
video conferencing.
specified and MultiWay is selected,
MultiWay will always be used for
video conferencing.
•
If a MultiWay address has been
specified, but MultiSite is selected,
MultiSite will be used.
specified, but MultiSite is selected,
MultiSite will be used.
•
If set to Auto, MultiWay will be
used if a MultiWay address
has been specified, otherwise
MultiSite will be used.
used if a MultiWay address
has been specified, otherwise
MultiSite will be used.
•
If set to Off, no video conferencing
will be possible.
will be possible.
•
Any use of the MultiSite feature
requires the presence of the
MultiSite option.
MultiSite option.
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
function letting you exit the menu
undoing any changes you have
made. Take care!
Settings
Administrator Settings—Multipoint Mode
About Multipoint
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!