Cisco Cisco IOS Software Release 12.0(13)S7
MPLS Safe Label Reuse After Router Restart
How to Configure MPLS Safe Label Reuse Parameters
7
Cisco IOS Release 12.0(32)SY
How to Configure MPLS Safe Label Reuse Parameters
The MPLS Safe Label Reuse feature is enabled by default with Cisco IOS Release 12.0(32)SY and later
releases. The MPLS Safe Label Reuse feature ensures the safe reuse of MPLS labels after a router restart.
releases. The MPLS Safe Label Reuse feature ensures the safe reuse of MPLS labels after a router restart.
The following sections describe how to disable and reenable the MPLS Safe Label Reuse feature and
how to change configurable parameters for the feature:
how to change configurable parameters for the feature:
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
(optional)
Disabling and Reenabling MPLS Safe Label Reuse
Perform the following tasks to disable and reenable the MPLS Safe Label Reuse After Router Restart
feature.
feature.
•
•
Disabling MPLS Safe Label Reuse
Perform the following task to disable safe MPLS label reuse after a router restart. You might want to
disable the MPLS Safe Label Reuse feature if:
disable the MPLS Safe Label Reuse feature if:
•
You judge your network is not susceptible to unsafe label reuse (for example, because you know that
neighbor routers always discard the labels learned from a restarting router more quickly than it takes
the router to restart).
neighbor routers always discard the labels learned from a restarting router more quickly than it takes
the router to restart).
•
Most or all MPLS labels must be available immediately following a router restart to meet the label
allocation needs of your network regardless of the risk of temporarily misforwarding MPLS traffic.
allocation needs of your network regardless of the risk of temporarily misforwarding MPLS traffic.
Prerequisites
You must be using Cisco IOS Release 12.0(32)SY or a later release that supports the MPLS Safe Label
Reuse After Router Restart feature.
Reuse After Router Restart feature.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
mpls label restart
4.
unsafe
5.
end