Cisco Cisco IOS Software Release 12.0(23)S

To configure SNMP over a specific VPN for a remote SNMP user, use the following command in global 
configuration mode:

To verify that the SNMP Support over VPNs feature is configured properly, use the show snmp-server 
host EXEC command.

This section provides the following configuration example:

The following example sends all SNMP notifications to xyz.com over the VRF named “trap-vrf”:

Router(config)# snmp-server host xyz.com vrf trap-vrf

The following example configures the VRF named “traps-vrf” for the remote server 10.10.2.3:

Router(config)# snmp-server engineID remote 10.10.2.3 vrf traps-vrf 

The following sections provide references related to SNMP Notification Support for VPNs feature. 

Router(config)# snmp-server engineID remote ip-address 

[udp-port udp-port-number][vrf vrf-name] engineid-string

Configures a name for the remote SNMP engine on a 
router.

SNMP Support for VPNs

, Release 12.4

None