Cisco Cisco MDS 9000 NX-OS Software Release 6.2 릴리즈 노트

Online Health Management System (OHMS)—The Generic Online Diagnostics (GOLD) system provides diagnostics for 
the Cisco MDS 9700 Series Director instead of the OHMS. In Cisco NX-OS Release 6.2, the GOLD system does not 
provide any support for automation of corrective actions, such as rebooting modules based on error thresholds.

OHMS is supported on Cisco MDS 9500 Series directors, Cisco MDS 9250i Multiservice Fabric Switch, 
Cisco MDS 9148S Multilayer Fabric Switch, and Cisco MDS 9148 Multilayer Fabric Switch.

Cisco NX-OS Release 6.2 does not support the following hardware:

Cisco MDS 9134 Fabric Switch

Cisco MDS 9124 Fabric Switch

Cisco MDS 4-Gbps Fabric Switch for HP c-Class BladeSystem

Cisco MDS 4-Gbps Fabric Switch for IBM BladeCenter

This section lists the limitations and restrictions. The following limitations are described:

The copy bootflash:runnig-config.ascii startup-config command that was deprecated in an earlier Cisco NX-OS release is 
enabled from Cisco NX-OS Release 6.2(1).

From Cisco NX-OS Release 6.2(9) onwards, the FC-SP feature is supported on Cisco MDS 9700 Series.

The install module module-number bios command is not supported on the Cisco MDS 9710 switch in Cisco NX-OS Release 
6.2(1) and later releases. Use the install all command to upgrade the BIOS during a software upgrade.

The install module module-number bios command continues to be supported in Cisco NX-OS Release 6.2(1) on Cisco MDS 
9500 Series switches.