Cisco Cisco IOS Software Release 12.2(2)XF 릴리즈 노트
5
Release Notes for the Cisco uBR10012 Universal Broadband Router for Cisco IOS Release 12.2 XF1
OL-1565-02
System Requirements
System Requirements
This section describes the system requirements for Cisco Release 12.2(2)XF1 and includes the following
sections:
sections:
•
•
•
•
•
Memory Recommendations
displays the memory recommendations of the Cisco IOS feature sets for the Cisco uBR10012
universal broadband router for Cisco IOS Release 12.2(2)XF1. Cisco uBR10012 universal broadband
routers are available with a 48-MB or 120-MB Type II PCMCIA Flash memory card.
routers are available with a 48-MB or 120-MB Type II PCMCIA Flash memory card.
Supported Hardware
For detailed descriptions of the new hardware features, see the
. Cisco IOS Release 12.2(2)XF1 supports the following hardware on Cisco uBR10012
routers:
Table 2
Memory Recommendations for the Cisco uBR10012 Routers, Cisco Release 12.2(2)XF1
Feature Sets
Feature Sets
Feature Set
Software Image
Recommended
Flash
Memory
Flash
Memory
Recommended
DRAM
Memory
DRAM
Memory
Runs
From
From
DOCSIS IP Plus
ubr10k-p6-mz
40 MB Flash
128 MB DRAM
RAM
DOCSIS BPI IP Plus
ubr10k-k8p6-mz
40 MB Flash
128 MB DRAM
RAM
Table 3
Cisco uBR10012 Universal Broadband Router Overview
Cable Interface Line cards
Up to eight Cisco uBR-LCP-MC28C line cards (Cisco uBR-MC28C
cable interface line card and Cisco Line Card Processor combined)
can be housed in a chassis. Each line card supports two domains of 1
downstream and 4 upstreams each, for a total of two downstreams
and eight upstreams for each card.
cable interface line card and Cisco Line Card Processor combined)
can be housed in a chassis. Each line card supports two domains of 1
downstream and 4 upstreams each, for a total of two downstreams
and eight upstreams for each card.
Network Uplink Line Cards
Up to four line cards with any combination of the following WAN
choices:
choices:
•
UBR10-1GE Gigabit Ethernet (GigE) uplink line card
•
UBR10-1OC12/P-SMI OC-12 POS uplink line card