Cisco Cisco IOS Software Release 12.4(22)XR
56
Cisco Packet Data Serving Node Release 5.2 for Cisco IOS Release 12.4(22)XR4
OL-21580-01
Features From Previous Releases
•
Base Station Identifier (D4) Attribute
The base station identifier (BSID) attribute represents the BSID, which is a number formed by
combining the SID (4 octets), NID (4 octets) and cell identifier (type 2 of 4 octets).
combining the SID (4 octets), NID (4 octets) and cell identifier (type 2 of 4 octets).
While sending the access-request, Cisco PDSN checks whether the required CLI command, cdma pdsn
attribute send d4 {auth-req | fa-chap | online-req}, is enabled. If the CLI command is not enabled, the
attribute is not sent in the authentication-request message to the AAA server. The BSID attribute is added
for prepaid online access-request message in much the same manner.
attribute send d4 {auth-req | fa-chap | online-req}, is enabled. If the CLI command is not enabled, the
attribute is not sent in the authentication-request message to the AAA server. The BSID attribute is added
for prepaid online access-request message in much the same manner.
PCF IP Address (D3) Attribute
The PCF IP address attribute represents the IP address of the serving PCF; in other words, the PCF in
the serving RAN. While sending the access-request message, Cisco PDSN checks whether the required
CLI command, cdma pdsn attribute send d3 {auth-req | fa-chap | online-req}, is enabled. If yes, Cisco
PDSN sends the PCF IP address attribute set to the PCF IP address in the authentication-request message
to the AAA server. The PCF IP address attribute is added for prepaid online access-request message in
much the same manner. If the CLI command is not enabled, the attribute is not sent in the
authentication-request message to the AAA server.
the serving RAN. While sending the access-request message, Cisco PDSN checks whether the required
CLI command, cdma pdsn attribute send d3 {auth-req | fa-chap | online-req}, is enabled. If yes, Cisco
PDSN sends the PCF IP address attribute set to the PCF IP address in the authentication-request message
to the AAA server. The PCF IP address attribute is added for prepaid online access-request message in
much the same manner. If the CLI command is not enabled, the attribute is not sent in the
authentication-request message to the AAA server.
User Zone (E1) Attribute
The user zone attribute represents the tiered services user zone. While sending the access-request
message, Cisco PDSN checks whether the required CLI command, cdma pdsn attribute send e1
{auth-req | fa-chap | online-req}, is enabled. If yes, Cisco PDSN sends the user zone attribute in an
authentication-request message to the AAA server. This attribute is added in much the same manner for
prepaid online access-request. If the CLI command is not enabled, the attribute is not sent in the
authentication-request message to the AAA server.
message, Cisco PDSN checks whether the required CLI command, cdma pdsn attribute send e1
{auth-req | fa-chap | online-req}, is enabled. If yes, Cisco PDSN sends the user zone attribute in an
authentication-request message to the AAA server. This attribute is added in much the same manner for
prepaid online access-request. If the CLI command is not enabled, the attribute is not sent in the
authentication-request message to the AAA server.
NAS Port Attribute
The NAS port attribute represents NAS port identification. While sending the access-request message,
Cisco PDSN checks whether the required CLI command is enabled. If yes, Cisco PDSN sends the NAS
port attribute set to the NAS port identification in the authentication-request message to the AAA server.
For prepaid online access-request messages, this attribute is already sent by default. If the CLI command,
cdma pdsn attribute send nas-port include-in-authen-req, is disabled, the attribute is not sent in the
authentication-request message to the AAA server.
Cisco PDSN checks whether the required CLI command is enabled. If yes, Cisco PDSN sends the NAS
port attribute set to the NAS port identification in the authentication-request message to the AAA server.
For prepaid online access-request messages, this attribute is already sent by default. If the CLI command,
cdma pdsn attribute send nas-port include-in-authen-req, is disabled, the attribute is not sent in the
authentication-request message to the AAA server.
Framed IP Address (B1) Attribute
The framed IP address attribute represents the IP address of the MS. While sending the access-request
message, Cisco PDSN checks whether the required CLI command, cdma pdsn attribute send b1
auth-req, is enabled. If yes, Cisco PDSN sends the framed IP address attribute set to 0.0.0.0 in the
authentication-request message to the AAA server. For prepaid online access-requests, this attribute is
already sent by default. If the CLI command is disabled, the attribute is not sent in the
authentication-request message to the AAA server.
message, Cisco PDSN checks whether the required CLI command, cdma pdsn attribute send b1
auth-req, is enabled. If yes, Cisco PDSN sends the framed IP address attribute set to 0.0.0.0 in the
authentication-request message to the AAA server. For prepaid online access-requests, this attribute is
already sent by default. If the CLI command is disabled, the attribute is not sent in the
authentication-request message to the AAA server.