Cisco Cisco IPS 4255 Sensor 릴리즈 노트

For detailed information about the ASA 5585-X and how to install it, refer to 

For detailed information about the IPS SSP-10, IPS SSP-20, IPS SSP-40, or IPS SSP-60, refer to 

For detailed information about the String XL engines, refer to 

.

In IPS versions 7.1(1)E4 through 7.1(5)E4, the IDM fails to connect to the sensor due to a failure during 
the initial handshake, because the web server is not RFC 5746-compliant. Try the following workaround.

Cannot launch the IDM, when the IDM is running under JRE 1.7 with IPS 7.1(1)E4 through 

7.1(5)E4.

Use JRE 1.6 or enable the SSL 2.0-compatible ClientHello format in the Java settings under 

Control Panel. 

After you upgrade any IPS software on your sensor, you must restart the IDM to see the latest software 
features. 

There are two ways to start the IDM:

Cross launch from the IME (recommended)

Open the IME and click Configuration. All the IDM functionality is available in the IME.

Through a browser

Enter the IP address of the target sensor in the address window as follows:

https://xx.xx.xx.xx

The IDM is a web-based, Java Web Start application that enables you to configure and manage your 
sensor. The web server for the IDM resides on the sensor. You can access it through Internet Explorer or 
Firefox web browsers.

The IDM is already installed on the sensor.

To log in to the IDM, follow these steps:

Open a web browser and enter the sensor IP address. A Security Alert dialog box appears.