Cisco Cisco IPS 4255 Sensor 릴리즈 노트
15
Release Notes for Cisco Intrusion Prevention System 6.0(4)E2
OL-20146-01
Upgrading to Cisco IPS 6.0(4)E2
Step 3
Determine the sensor version:
sensor# show version
Step 4
Enter configuration mode:
sensor# configure terminal
Step 5
Upgrade the sensor with the signature engine update:
sensor(config)# upgrade scp://tester@10.1.1.1//upgrade/IPS-engine-E2-req-6.0-4.pkg
Step 6
Enter the password when prompted:
Enter password: ********
Step 7
Enter
yes
to complete the upgrade.
Note
The sensor reboots after installing the signature engine.
Step 8
Verify your new sensor version:
sensor# show version
Application Partition:
Cisco Intrusion Prevention System, Version 6.0(4)E2
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S291.0 2007-06-18
Virus Update V1.2 2005-11-24
OS Version: 2.4.30-IDS-smp-bigphys
Platform: ASA-SSM-20
Serial Number: P300000220
No license present
Sensor up-time is 13 days.
Using 1039052800 out of 2093682688 bytes of available memory (49% usage)
system is using 17.8M out of 29.0M bytes of available disk space (61% usage)
application-data is using 49.9M out of 166.6M bytes of available disk space (32% usage)
boot is using 37.8M out of 68.5M bytes of available disk space (58% usage)
MainApp N-2007_JUN_19_16_45 (Release) 2007-06-19T17:10:20-0500 Running
AnalysisEngine N-2007_JUN_19_16_45 (Release) 2007-06-19T17:10:20-0500 Running
CLI N-2007_JUN_19_16_45 (Release) 2007-06-19T17:10:20-0500
Upgrade History:
IPS-K9-6.0-4-E.2 15:31:13 UTC Mon Sep 10 2007
Recovery Partition Version 1.1 - 6.0(4)E2
sensor#