Cisco Cisco IPS 4255 Sensor 릴리즈 노트

The BIOS on Cisco IDS/IPS sensors is specific to Cisco IDS/IPS sensors and must only be upgraded 
under instructions from Cisco with BIOS files obtained from the Cisco website. Installing a non-Cisco 
or third-party BIOS on Cisco IDS/IPS sensors voids the warranty. For more information on how to obtain 
instructions and BIOS files from the Cisco website, see 

.

The following files are part of Cisco IPS 6.0(4)E2:

IPS 6.0-4-E2 Engine Update Files 

IPS-engine-E2-req-6.0-4.pkg 

IPS-CS-MGR-engine-E2-req-6.0-4.zip 

Readme Files 

IPS-engine-E2.readme.txt 

For the procedure for obtaining these files on Cisco.com, see 

For the procedure for installing signature engine upgrade files, see 

.

The number of concurrent CLI sessions is limited based on the platform. The IDS 4215 and NM CIDS 
are limited to three concurrent CLI sessions. All other platforms allow ten concurrent sessions.

Cisco IPS 6.0(4)E2 is supported on the following platforms:

IDS 4215 Series Sensor Appliances

IDS 4235 Series Sensor Appliances

IPS 4240 Series Sensor Appliances

IDS 4250 Series Sensor Appliances

IPS 4255 Series Sensor Appliances

IPS 4260 Series Sensor Appliances

IPS 4270-20 Series Sensor Appliances

WS-SVC-IDSM2 series Intrusion Detection System Module (IDSM2)

Intrusion Detection System Network Module (NM CIDS)

ASA-SSM-AIP-10 series Cisco ASA Advanced Inspection and Prevention Security Service 
Modules (AIP SSM-10)

ASA-SSM-AIP-20 series Cisco ASA Advanced Inspection and Prevention Security Service 
Modules (AIP SSM-20)