Cisco Cisco IPS 4255 Sensor 릴리즈 노트

IME filtering, grouping, and reporting elements support IPv6 addresses in addition to IPv4 
addresses.

AIP SSC-5 

Advanced Inspection and Prevention Security Services Card. The IPS plug-in module in the Cisco 
ASA 5505 series adaptive security appliance.The AIP SSC-5 uses IPS services to stop malicious 
traffic, including worms and network viruses, before they can affect your network. 

10GE interface card

The 10GE interface card (part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT=) provides 
two 10000 Base-SX (fiber) interfaces. The IPS-4260 supports one 10GE interface card for a total of 
two 10GE fiber interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of 
four 10GE fiber interfaces.

The SMB engine has been replaced by the SMB Advanced engine. Even though the SMB engine is 
still visible in IDM, IME, and the CLI, its signatures have been obsoleted; that is, the new signatures 
have the obsoletes parameter set with the IDs of their corresponding old signatures. Use the new 
SMB Advanced engine to rewrite any custom signature that were in the SMB engine.

For information on the SMB Advanced engine, refer to 

For information on the Atomic IP engines, refer to 

For a list of IPv6 restrictions, see 

.

For more information on the AIP SSC-5, refer to 

 and 

For more information about the 10GE interface card, refer to 

Because MySDN has been decommissioned, the URL in older versions of IDM and IME is no longer 
functional. If you are using IPS 6.0 or later, we recommend that you upgrade your version of IDM and 
IME.

You can upgrade to the following versions to get the functioning MySDN URL:

IDM 7.0.3

IME 7.0.3

IPS 7.0(4), which contains IDM 7.0.4

If you are using version IPS 5.x, you must look up signature information manually at this URL:

For detailed information on MySDN, for IDM refer to 

 and for IME refer to