Cisco Cisco IPS 4255 Sensor 릴리즈 노트
22
Release Notes for Cisco Intrusion Prevention System 6.1(1)E2
OL-19696-01
After Upgrading to Cisco IPS 6.1(1)E2
•
Click the License File radio button to use a license file. To use this option, you must apply for a
license key at
license key at
. The license key is sent to you in e-mail and you save it to
a drive that IDM or IME can access. This option is useful if your computer cannot access Cisco.com.
Go to Step 7.
Go to Step 7.
Step 4
Click Update License, and in the Licensing dialog box, click Yes to continue. The Status dialog box
informs you that the sensor is trying to connect to Cisco.com. An Information dialog box confirms that
the license key has been updated.
informs you that the sensor is trying to connect to Cisco.com. An Information dialog box confirms that
the license key has been updated.
Step 5
Click OK.
Step 6
Go to
Step 7
Fill in the required fields. Your license key will be sent to the e-mail address you specified.
Caution
You must have the correct IPS device serial number because the license key only functions on the device
with that number.
with that number.
Step 8
Save the license key to a hard-disk drive or a network drive that the client running IDM or IME can
access.
access.
Step 9
Log in to IDM or IME.
Step 10
Choose Configuration > Sensor Management > Licensing.For IDM choose Configuration > Sensor
Management > Licensing. For IME choose Configuration > sensor_name > Sensor Management >
Licensing.
Management > Licensing. For IME choose Configuration > sensor_name > Sensor Management >
Licensing.
Step 11
Under Update License, click the License File radio button.
Step 12
In the Local File Path field, specify the path to the license file or click Browse Local to browse to the file.
Step 13
Browse to the license file and click Open.
Step 14
Click Update License.
Using the CLI
Use the copy source-url license_file_name license-key command to copy the license key to your sensor.
The following options apply:
•
source-url—The location of the source file to be copied. It can be a URL or keyword.
•
destination-url—The location of the destination file to be copied. It can be a URL or a keyword.
•
license-key—The subscription license file.
•
license_file_name—The name of the license file you receive.
Note
You cannot install an older license key over a newer license key.
The exact format of the source and destination URLs varies according to the file. Here are the valid
types:
types:
•
ftp:—Source or destination URL for an FTP network server. The syntax for this prefix is:
ftp:[//[username@] location]/relativeDirectory]/filename
ftp:[//[username@]location]//absoluteDirectory]/filename