Cisco Cisco IPS 4255 Sensor 릴리즈 노트

OS Version:             2.4.30-IDS-smp-bigphys

Platform:               ASA-SSM-20

Serial Number:          P300000220

Sensor up-time is 3 days.

Using 1031888896 out of 2093682688 bytes of available memory (49% usage)

system is using 17.8M out of 29.0M bytes of available disk space (61% usage)

application-data is using 52.4M out of 166.6M bytes of available disk space (33% usage)

boot is using 37.8M out of 68.5M bytes of available disk space (58% usage)

MainApp          N-2007_JUN_19_16_45   (Release)   2007-06-19T17:10:20-0500   Running

AnalysisEngine   N-2007_JUN_19_16_45   (Release)   2007-06-19T17:10:20-0500   Running

CLI              N-2007_JUN_19_16_45   (Release)   2007-06-19T17:10:20-0500

Upgrade History:

  IPS-K9-6.1-1-E2 15:36:05 UTC Thu Apr 24 2008

Recovery Partition Version 1.1 - 6.1(1)E2

Host Certificate Valid from: 25-Apr-2008 to 26-Apr-2010

sensor#

Copy your license key from a sensor to a server to keep a backup copy of the license.

sensor# copy license-key scp://user@10.89.147.3://tftpboot/dev.lic 

Password: *******

sensor#

If you have a version of Cisco IPS Event Viewer installed, the Install wizard prompts you to remove it 
before installing IME. 

IME event monitoring is also supported in IOS-IPS versions that support the Cisco IPS 5.x/6.x signature 
format. We recommend IOS-IPS 12.4(15)T4 if you intend to use IME to monitor an IOS IPS device. 
Some of the new IME functionality including health monitoring is not supported.

Do not install IME on top of existing installations of CSM or IEV. You must uninstall these applications 
before installing IME.

Disable any anti-virus or host-based intrusion detection software before beginning the installation, and 
close any open applications. The installer spawns a command shell application that may trigger your 
host-based detection software, which causes the installation to fail. 

You must be administrator to install IME.