Cisco Cisco Aironet 1552WU Outdoor Access Point 릴리즈 노트

You can configure the access point using any of the following methods:

To configure an access point using the network configuration, enter the values for the following fields:

Hostname 

IP Address 

Server protocol 

IP Subnet

Default Gateway

Admin Login

Admin Password

SNMP Community

To configure an access point using Radio Configuration, configure the following fields:

SSID—a 32 byte string.

Security.

Role in Radio Network

Access point—Root device. This setting can be applied to any access point. 

Repeater—Nonroot device. This setting also can be applied to any access point. 

Root Bridge—This setting can be applied to any access point.

Non-Root Bridge—This setting can be applied to any access point.

Workgroup Bridge—This setting can be applied to any access point.

Scanner—Access point functions as a network monitoring device. It continuously scans and 
reports wireless traffic it detects from other wireless devices on the wireless LAN in this mode. 
All access points can be configured as a scanner.

Optimize Radio—You can either select preconfigured settings or customize the settings for the 
wireless device radio.

Aironet Extensions—You can enable this setting if there are only Cisco Aironet wireless devices on 
your wireless LAN.

Current SSID list on the screen displays a list SSID configured to the access point. It is a read-only 
list.

Click Factory Reset to reset the access point to the factory settings. To reload the access point image, 
click Reboot AP.

Band Select allows you to move to the less congested radios if your Wi-Fi radios are capable of dual 
band operation. This feature improves the overall performance of the network.