Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드
Americas Headquarters:
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
AC Power Cords for Cisco Aironet 1520 Series
Outdoor Mesh Access Points
Outdoor Mesh Access Points
The Cisco Aironet 1520 series outdoor mesh access point (hereafter called the access point) supports
these AC power cord options:
these AC power cord options:
•
40-ft (12.2-m) power cord (AIR-CORD-R3P-40NA=) for light pole installations in the US and
Canada.
Canada.
•
40-ft (12.2-m) power cord (AIR-CORD-R3P-40UE=) for light pole installations in the European
Union.
Union.
•
4-ft (1.2-m) streetlight power tap adapter (AIR-PWR-ST-LT-R3P=) for light pole installations in the
US and Canada.
US and Canada.
Warning
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Statement 1022
Statement 1022
Caution
Prior to connecting or disconnecting a power cord, you must remove AC power from the power cord
using a suitable service disconnect.
using a suitable service disconnect.
Note
European Union users need to install a country-specific plug to the blunt cut end of the cable assembly.
Table 1
AC Power Cord Information
AC Power Cord
Cord Diameter
Comment
AIR-CORD-R3P-40NA=
0.398 to 0.413 in.
(10.1 mm to 10.5 mm)
(10.1 mm to 10.5 mm)
The three prong plug is limited to 120 VAC.
Internal wiring is rated at 600 VAC
insulation protection.
Internal wiring is rated at 600 VAC
insulation protection.
AIR-CORD-R3P-40UE=
0.398 to 0.413 in.
(10.1 mm to 10.5 mm)
(10.1 mm to 10.5 mm)
Power cord rating is 100 to 480 VAC.
AIR-PWR-ST-LT-TAP=
Strain relief bushing not needed
Power cord rating is 100 to 480 VAC.