Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드

For additional installation, mounting and safety information for the outdoor mesh access 
point, see the Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation 
Guide, which is available on Cisco.com, and 

, which accompanies this guide. 

Do not operate the unit near unshielded blasting caps or in an explosive environment 
unless the device has been modified to be especially qualified for such use. Statement 364

The access point is deployed on Layer 3 networks. Layer 3is the default mode for a newly configured 
wireless LAN controller. This guide assumes that you will be deploying your access point on a Layer 
3 network and a DHCP server is available.

Before deploying the access point, make sure the controller to which the access point will associate is 
properly configured by performing the following operations:

Make sure that the wireless LAN controller is set to Layer 3 mode

Verify the wireless LAN controller software version

Record the access point BVI MAC address

Enter the access point BVI MAC address to the wireless LAN controller filter list

Follow these steps to verify that the wireless LAN controller mode is set to Layer 3:

Open your web-browser and enter the IP address of your wireless LAN controller. Be sure to 
precede the IP address with https://. A login screen appears.

Enter your username and password. The default case-sensitive username and password are 
admin and admin. The Summary page appears.

From the top menu bar, click CONTROLLER. The Controller General page appears.

Verify that the LWAPP Transport Mode is set to Layer 3. If it is not, change it to Layer 3 and 
click Apply.

Save any changes you made.