Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드
23
Step 6
From the menu bar, click MONITOR to return to the Monitor Summary page.
Verifying the Wireless LAN Controller Software Version
On the Summary page, you can verify the software version that the wireless LAN controller is running.
If a version update is necessary, refer to the appropriate controller configuration documentation.
If a version update is necessary, refer to the appropriate controller configuration documentation.
Recording the Access Point MAC Address
Use a text file to record the MAC address of all the access points you intend to deploy in your network.
Having a file of access point MAC addresses will be of considerable value for future testing. While you
are compiling the list, you might want to change the name of the access point to something you can
easily remember. The name can contain up to 32 characters. The following example, fisher_street:ea:co
contains the last four HEX characters of the access point MAC address.
Having a file of access point MAC addresses will be of considerable value for future testing. While you
are compiling the list, you might want to change the name of the access point to something you can
easily remember. The name can contain up to 32 characters. The following example, fisher_street:ea:co
contains the last four HEX characters of the access point MAC address.
Adding the Access Point MAC Address to the Wireless LAN Controller
Filter List
Filter List
The wireless LAN controller maintains an access point authorization MAC address list and responds
to discovery requests from access points on that list. Follow these steps to add the access point MAC
address (or MAC addresses) to the Wireless LAN controller filter list:
to discovery requests from access points on that list. Follow these steps to add the access point MAC
address (or MAC addresses) to the Wireless LAN controller filter list:
Step 1
If you are not logged onto the wireless LAN controller, log on now. The Summary page
appears.
appears.
Step 2
On the menu bar, click SECURITY. The Security RADIUS Authentication Server page
appears.
appears.
Step 3
Under AAA in the left frame, click MAC Filtering. The Security MAC Filtering page appears.
Step 4
Click New. The MAC Filters New page appears.
Step 5
Enter the MAC address of the access point in the MAC Address field. You can also use the
config macfilter add command to add a MAC filter entry to the controller.
config macfilter add command to add a MAC filter entry to the controller.
Step 6
Select a WLAN ID or Any WLAN from the WLAN ID pop-up menu.
Step 7
Enter a description (32 characters maximum) of the access point in the Description field.
Step 8
Choose an interface from the Interface Name pop-up menu.
Step 9
Click Apply.
Step 10
Repeat this process to add other access points to the list.