Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드

IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you 
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar 
with standard practices for preventing accidents. Use the statement number provided at the end of 
each warning to locate its translation in the translated safety warnings that accompanied this device. 
Statement 1071
SAVE THESE INSTRUCTIONS

Do not operate the unit near unshielded blasting caps or in an explosive environment unless the 
device has been modified to be especially qualified for such use. Statement 364

This equipment must be externally grounded using a customer-supplied ground wire before power is 
applied. Contact the appropriate electrical inspection authority or an electrician if you are uncertain 
that suitable grounding is available. Statement 366

Read the installation instructions before connecting the system to the power source. Statement 1004

Ultimate disposal of this product should be handled according to all national laws and regulations. 
Statement 1040

Follow the guidelines in this section to ensure proper operation and safe use of the access point.

The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF 
electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco Aironet 
antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI 
C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results 
in user exposure substantially below the FCC recommended limits.

In order to comply with radio frequency (RF) exposure limits, the antennas for this product should be 
positioned no less than 6.56 ft (2 m) from your body or nearby persons. Statement 339

The AC power supply has double pole/neutral fusing. Statement 188