Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 설치 가이드

To install the access point on a cable strand, you need the following additional parts:

Cable strand mount kit (AIR-ACCSMK1520=) 

Strand mounting bracket

Strand clamp bracket

Four cable clamps

Four M8 flange nuts 

Four hex bolts (M8 x16)

Four M8 split lock washers and six M8 flat washers

Customer supplied 13-mm box-end wrench or socket set

Customer supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench 

To install the access point in a hazardous location, you need the following additional parts:

Two Cisco supplied PG-13 1/2 NPT conduit adapters

One Cisco supplied grounding lug with screw and lock washers

Customer supplied 13-mm box-end or socket set

Customer supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench

Customer-supplied #1 Phillips or standard screwdriver

Customer supplied appropriate lengths of 1/2 NPT rigid metal conduit

Customer supplied wire strippers

Customer supplied ground lug crimping tool (Panduit CT-720 with CD-720-1 die) 

See the 

 for detailed information 

and procedures.

Translated versions of all safety warnings are available in the safety warning document that shipped with 
your access point. 

See 

 for warnings that apply to 

hazardous location installations.