Cisco Cisco Aironet 1530i Outdoor Access Point 설치 가이드
14
Preparing a 2500 Series Controller for Manual Priming
Step 1
Open the WLC graphical user interface (GUI)
Step 2
Choose WLANs to open the WLANs page.
This page lists all of the WLANs currently configured on the controller. For each WLAN, you
can see its WLAN ID, profile name, type, SSID, status, and security policies.
can see its WLAN ID, profile name, type, SSID, status, and security policies.
Step 3
Click the WLAN ID of the WLAN to which the universal AP is to associate. The SSID of this
WLAN is the same SSID which the smartphone will need to connect to later, when priming
the universal AP.
WLAN is the same SSID which the smartphone will need to connect to later, when priming
the universal AP.
Step 4
Go to Security tab > Layer 2 tab.
a.
Choose Layer 2 Security as ‘WPA+WPA2’
b.
Under WPA+WPA2 Parameters check the WPA2-Policy AES check box.
c.
Under Authentication Key Management enable 802.1x or PSK, based on your requirements.
Step 5
Go to the Advanced tab. Enable Universal Admin Support by checking the
Universal AP Admin check box.
Universal AP Admin check box.
Step 6
On the General tab, select the Status check box to enable this WLAN.
Alternatively, to enable the WLAN at a later stage:
Alternatively, to enable the WLAN at a later stage:
a.
Choose WLANs to open the WLANs page.
b.
Enable or disable a WLAN from the WLANs page by selecting the check box to the left of
that WLAN.
that WLAN.
c.
Choose Enable Selected from the drop-down list
d.
Click Go.
e.
Click Apply.
Step 7
Click Apply to commit your changes.
Step 8
Click Save Configuration to save your changes.
During manual priming, using Cisco AirProvision, ensure that all non-universal APs on this WLAN
are disabled. This ensures that the smartphone connects to only the universal AP awaiting priming.
are disabled. This ensures that the smartphone connects to only the universal AP awaiting priming.
Once your configuration settings are committed, proceed with
Note
For information on WLANs and on changing WLAN settings, see the WLANs chapter of the
Cisco Wireless LAN Controller Configuration Guide, at the following URL:
Cisco Wireless LAN Controller Configuration Guide, at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_c
g80_chapter_01000100.html
g80_chapter_01000100.html