Cisco Cisco Aironet 1530i Outdoor Access Point 설치 가이드
16
Preparing an Autonomous AP for Manual Priming
Note
Only the mandatory configuration steps specific to preparing an autonomous mode AP for
manual priming, is provided in the following procedure. For generic details on configuring an
autonomous AP, see the Configuring the Access Point for the First Time chapter of the Cisco
IOS Configuration Guide for Autonomous Aironet Access Points, at the following URL:
manual priming, is provided in the following procedure. For generic details on configuring an
autonomous AP, see the Configuring the Access Point for the First Time chapter of the Cisco
IOS Configuration Guide for Autonomous Aironet Access Points, at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-
3-3/cg15-3-3-chap4-first.html
3-3/cg15-3-3-chap4-first.html
Step 1
Open your Internet browser.
Step 2
Enter the wireless device IP address, assigned by the DHCP server, in the browser address line
and press Enter.
An Enter Network Password screen appears.
and press Enter.
An Enter Network Password screen appears.
Step 3
Press Tab to bypass the Username field and advance to the Password field.
Step 4
Enter the case-sensitive password ‘Cisco’ and press Enter.
The Summary Status page appears.
The Summary Status page appears.
Step 5
Go to Easy Setup > Network Configuration.
Here, you can leave the following Network Configuration settings with their default values:
Here, you can leave the following Network Configuration settings with their default values:
Configuration Setting
Default Value
Host Name
ap
Server Protocol
DHCP
IP Address
IP Subnet Mask
Default Gateway
As assigned by DHCP
IPv6 Protocol
DHCP and Autoconfig are
checked
checked
SNMP Community
defaultCommunity (read-only)