Cisco Cisco Industrial Wireless 3702 Access Point 설치 가이드
11
Cisco IW3702 Access Point Getting Started Guide
Installation
Figure 5
Cisco IW3702 Series Access Point Hard Points
Management Options
You can manage the access point using the following options:
Web browser Interface—Contains management pages to change the wireless device settings, upgrade firmware, and
monitor and configure other wireless devices on the network.
monitor and configure other wireless devices on the network.
Cisco IOS command-line interface (CLI)—Configures the access point. You can access the CLI by directly connecting
a PC to the console port, or you can access the CLI using a Telnet session from a remote management station.
a PC to the console port, or you can access the CLI using a Telnet session from a remote management station.
Installation
You can install the access point on a wall, ceiling or pole, in a cabinet or rack, under a seat, or in a plenum airspace. You
can direct mount, DIN rail mount, or attach the access point on a pole mounting bracket.
can direct mount, DIN rail mount, or attach the access point on a pole mounting bracket.
Perform the installation procedures in this order:
1.
2.
3.
4.
5.
6.
1
Hard points 1/4-20UNC-2B, .45" deep