Cisco Cisco Industrial Wireless 3702 Access Point 설치 가이드
17
Cisco IW3702 Access Point Getting Started Guide
Installation
4.
If necessary, strip the other end of the ground wire and connect it to a reliable earth ground such as a grounding rod
or appropriate ground point on a grounded pole. Length of the ground cable should not exceed 1 meter, and 0.5
meter is preferred. Use supplied oxide inhibitor on the grounded interface.
or appropriate ground point on a grounded pole. Length of the ground cable should not exceed 1 meter, and 0.5
meter is preferred. Use supplied oxide inhibitor on the grounded interface.
Wiring the Access Point DC Power
To wire the access point to a DC power source:
1.
Verify that the access point is grounded (see
).
2.
Connect the power lead to the PWR connector by turning the cable clockwise, as shown in the following figure.
1
Ground connection