Cisco Cisco Aironet 1530i Outdoor Access Point 릴리즈 노트
2
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.2(4)JB5
OL-30935-01
Contents
Contents
These release notes contain these sections:
•
•
•
•
•
•
•
Introduction
The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
System Requirements
You can install the 32 MB Cisco IOS Release 15.2(4)JB5 on all 802, 1040, 1140, 1260, 1550, 1600,
2600, 3500, and 3600 series access points. New APs 702 and 1530 support 128 MB minimum flash and
AP 3700 supports 64 MB minimum flash.
2600, 3500, and 3600 series access points. New APs 702 and 1530 support 128 MB minimum flash and
AP 3700 supports 64 MB minimum flash.
Finding the Cisco IOS Software Release
To find the version of Cisco IOS software that is running on your access point, use a Telnet session to
log into the access point, and enter the show version EXEC command. This example shows command
output from an access point that is running Cisco IOS Release 15.2(4)JB5:
log into the access point, and enter the show version EXEC command. This example shows command
output from an access point that is running Cisco IOS Release 15.2(4)JB5:
ap1260AG> show version
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 15.2(4)JB5
Copyright (c) 1986-2010 by Cisco Systems, Inc.
On access points running Cisco IOS software, you can also find the software release on the System
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Upgrading to a New Software Release
To upgrade your access point or bridge software, follow these steps:
Step 1
Follow this link to the Cisco home page: