Cisco Cisco Aironet 1400 Wireless Bridge 릴리즈 노트

The following are key bridge features:

Unlicensed UNII-3 5.8-GHz radio operation

Integrated antenna or external antenna configurations 

Integrated antenna configuration—with 22.5-dBi patch array

External antenna configuration—with an antenna connector for an external antenna

Metal enclosure supports outdoor installations

Integrated antenna configuration—the enclosure has been successfully

 

tested for protection 

against the ingress of particulate matter and fluids in compliance with a NEMA Type 4 (IP56) 
enclosure rating.

External antenna configuration—the enclosure has been successfully

 

tested and is in 

compliance with a NEMA Type 4 (IP56) enclosure rating.

Industrial temperature rating—operating temperature of –22 to 131

o

F (–30 to 55

o

C) 

Power injector dual-coax ports supports:

100-Mbps Ethernet over dual-coax cables

Inline power over dual-coax cables

Four LED indicators on bridge

Install, Radio, Status, and Ethernet

Receive Signal Strength Indicator (RSSI) voltage port for easy antenna alignment

Bridge control using Cisco IOS commands, Internet browser, or SNMP

Point-to-point and point-to-multipoint bridge operation

Three optional external bridge antennas

9-dBi omnidirectional external antenna with vertical polarization 

9.5-dBi sector external antenna

28-dBi dish external antenna

This section contains important information to keep in mind when installing your bridge.