Cisco Cisco Aironet 1400 Wireless Bridge 릴리즈 노트
9
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.2(11)JA
OL-4086-01
Caveats
Wireless Packet Concatenation
The wireless concatenation feature might not be supported on all products. For example, the 1310 series
bridge supports concatenation but the 1200 series access point does not. To prevent connectivity
problems, always ensure your wireless LAN products support wireless concatenation before attempting
to implement the feature.
bridge supports concatenation but the 1200 series access point does not. To prevent connectivity
problems, always ensure your wireless LAN products support wireless concatenation before attempting
to implement the feature.
Caveats
This section lists open caveats in Cisco IOS Release 12.2(11)JA for the bridge.
Open Caveats
These caveats are open in Cisco IOS Release 12.2(11)JA for the bridge:
•
CSCea28990—Cannot pass IP traffic when bridge # route IP is configured.
The bridge # route ip command must not be configured for the bridge groups assigned to non-native
VLANS because this setting stops IP traffic across the bridge for those non-native VLANS.
VLANS because this setting stops IP traffic across the bridge for those non-native VLANS.
•
CSCea57649—The CLI Help command produces incorrect output for the radio interface.
When using the CLI Help command from the radio interface, the command output is repeated
multiple times.
multiple times.
There is no workaround for this problem.
•
CSCea75989—The non-root bridge does not reset the dot11 association counters when it reassociates to
the root bridge.
the root bridge.
There is no workaround for this problem.
•
CSCea81730—The web interface for the non-root bridge incorrectly displays the root-bridge MAC
address on the radio page.
address on the radio page.
There is no workaround for this problem.
•
CSCeb03832—Bridge does not detect some invalid software images when using the copy command.
Workaround: Use the CLI archive download command.
•
CSCeb04390—Bridge does not detect simultaneous software downloads when using the copy
command in different sessions.
command in different sessions.
Workaround: Use the CLI archive download command.
•
CSCeb05054—Multiple non-root bridges do not associate to the root bridge after any configuration
changes to the radio interface.
changes to the radio interface.
The root bridge in a point-to-multipoint link does not allow non-root bridges to reassociate after
configuration changes are made to the radio interface, until the root bridge has rebooted (power
turned off and on).
configuration changes are made to the radio interface, until the root bridge has rebooted (power
turned off and on).
Workaround: After changing the radio interface configuration on a point-to-multipoint link, you
must reboot the root bridge (turn power off and on).
must reboot the root bridge (turn power off and on).
•
CSCeb05835— The web interface shows incorrect STP Root information on a bridge setup with
multiple VLANs.
multiple VLANs.
There is no workaround for this problem.