Cisco Cisco 5520 Wireless Controller 문제 해결 가이드
Wireless Proxy Mobile IPv6 Configuration Guide
Document ID: 113686
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Prerequisites
Requirements
Components Used
Conventions
MAG − PMIPv6 feature support on WLC (Release 7.3)
PMIPv6 provisioning on LMA simulator
MAG−PMIPv6 Provisioning on WLC GUI
Monitoring and verifying PMIPv6 client connectivity on WLC
Additional CLI and Debug info
MAG− PMIPv6 show commands available through WLC CLI
MAG PMIPv6 Debug commands available on WLC
Related Information
PMIPv6 provisioning on LMA simulator
MAG−PMIPv6 Provisioning on WLC GUI
Monitoring and verifying PMIPv6 client connectivity on WLC
Additional CLI and Debug info
MAG− PMIPv6 show commands available through WLC CLI
MAG PMIPv6 Debug commands available on WLC
Related Information
Introduction
Why Proxy Mobile IPv6 (PMIPv6)?
PMIPv6/S2a is standardized way of integrating trusted non−3GPP access networks with a standardized 3GPP
Evolved Packet Core (EPC). In this case, trusted non−3GPP access networks = SP WiFi.
Evolved Packet Core (EPC). In this case, trusted non−3GPP access networks = SP WiFi.
PMIPv6 enables IP mobility for a host without requiring its participation in any mobility−related signaling.
The network is responsible for managing IP mobility on behalf of the host. The mobility entities in the
network are responsible for tracking the movements of the host and initiating the required mobility signaling
on its behalf.
The network is responsible for managing IP mobility on behalf of the host. The mobility entities in the
network are responsible for tracking the movements of the host and initiating the required mobility signaling
on its behalf.
PMIPv6 is used for intersystem and inter− Vendor handovers between 3GPP and non−3GPP radio access
technologies, such as WiMAX, 3GPP, 3GPP2 and WLAN.
technologies, such as WiMAX, 3GPP, 3GPP2 and WLAN.