Cisco Cisco 5520 Wireless Controller 문제 해결 가이드

다운로드
페이지 11
between the MN's home network prefix and the MAG where the MN is attached.
Proxy Binding Acknowledgement (PBA)A reply message sent by LMA in response to a PBU
message that it received from a MAG.
• 
Prerequisites
Requirements
In order to have complete end to end testing of MAG−PMIPv6 testing on the WLC, there must be a LMA
(ASR5k, ASR1k or simulator) present in the setup.
These parameters must be known in order to provision the MAG − PMIPv6 function on the WLC:
The PMIPv6 Domain that the WLC−MAG will be a part of.
• 
Name and IP address of the LMA that the WLC will be communicating with.
• 
Access Point Name (APN) service profile that the PMIPv6 profile on the WLC will be bound to. The
APN will be defined on the LMA.
• 
Network Access Identifier (NAI) to be used on the PMIPv6 profile on the WLC.
• 
Components Used
The information in this document is based on these software and hardware versions:
MAG PMIPv6 on WLC 5508
• 
WLC software 7.3
• 
Catalyst switch
• 
LMA simulator (ASR5k)
• 
AP3600
• 
Client devices (Laptop, iPhone and iPad)
• 
DHCP server
• 
Topology: